France

TKR-D810E
  • TKR-D810E

Images additionnelles

TKR-D810E

Station de base numérique DMR UHF (certification ETSI)


Points forts

TDMA DMR Digital Air Interface - 2 slot/1 carrier in 12.5kHz
DMR Tier 2 Conventional Repeater Operation.
Complies with ETSI TS 102 361-1/-2/-3
Operates in DMR Digital and FM Analogue modes, even on the same channel. Autosenses Received Mode (Digital or Analogue)
QT/DQT/Colour Code signalling
DMR Frame Error detection
Vocoder FEC Threshold
Multi-Site IP Network Mode (via KTI-5 option)

Accessoires fournis

CâbleOui
Câble d' alimentation CCOui
PiedOui, 4 pièces
Front GlassOui
FusibleOui
PoignéeOui
Hardware FixtureOui
Mode d'emploiOui, En anglais, français, espagnol, italien, allemand, néerlandais, turc, grec et russe
Ensemble de visOui

Caractéristiques base et répétiteur

16 CTCSS/DCS Repeater Controller Built-InOui
19" Rack Mount DesignOui
"Base Station" or "Repeater" Mode OperationOui
DTMF AUX Input MonitoringOui
DTMF AUX Output ControlOui
DTMF Front Panel PF-Key ControlOui
Flash ROM for Future UpgradesOui
Front Mounted SpeakerOui
Hang TimerOui
LED Display & IndicatorsOui
Microphone Jack on Front PanelOui
Programmable AUX I/OsOui
Programmable Function Keys6
RF Power-down DetectOui
Volume Control on Front PanelOui
Windows Programming and Tuning SoftwareOui

Caractéristiques DMR

AMBE+2 VocoderOui, (Future Update)
Colour-code Repeater ControlOui
Console InterfaceOui, with optional KTI-5
Conventional IP NetworkOui, with optional KTI-5
Repeater Control Built-inOui
TDMA 2-slot System ArchitectureOui

Normes applicables

For use in the EUOui
Measurement - EN StandardsOui

Spécifications techniques

Frequency Range - E Type400-470 MHz
Number of Channels30
Channel Frequency Spread70 MHz
Channel Spacing - Analogue - Wide/Narrow25 kHz/12,5 kHz
Channel Spacing - Digital12,5 kHz
Antenna Impedance - 50 OhmOui
Current drainStand-By: 0.5 A
Receive: 1.0 A
Transmit: 11.0 A
Frequency Stability- ± 1 ppmOui
Operating Temperature Range-30 °C to + 60 °C
Operating Voltage13.2 V DC (10.8 ~ 15.6 V DC)
PLL Channel Steps3.125 kHz / 5 kHz
Dimensions (WxHxD)483 x 88 x 340 mm
- Projections not included -
Weight (net)9.7 kg

Caractéristiques du récepteur

Adjacent Channel Selectivity (Analogue)25 kHz / 12.5 kHz = 80 dB / 74 dB
Audio OutputExternal Speaker: 4 W with less than 5% distortion at 4 Ohm
FM Hum & Noise25 kHz / 12.5 kHz - 55 dB / 50 dB
Intermodulation72 dB
Sensitivity - EN 12 dB SINAD0.28 µV
Sensitivity - EN 20 dB SINAD-3 dBµV
Sensitivity (Digital)At 12.5 kHz - 5% BER: 0.25 µV 1% BER: 0.35 µV
Spurious Response Rejection85 dB

Caractéristiques d'émetteur

RF Power Output5 W to 40 W at 50% Duty Cycle (25 W at 100% Duty Cycle)
Audio DistortionLess than 1% at 1 kHz
FM Noise (Wide/Narrow)55 dB / 50 dB
Modulation LimitingAnalogue:
± 5.0 kHz at 25 kHz
± 2.5 kHz at 12.5 kHz
Spurious Emission (EN)-36 dBm ≤ 1 GHz
-30 dBm > 1 GHz