France

NXR-710E dPMR
  • NXR-710E dPMR
  • NXR-710E dPMR

Images additionnelles

NXR-710E dPMR

NEXEDGE VHF dPMR Digital Conventional/Analogue Repeater (EU Use)


Points forts

dPMR TS102 658 Mode 2 Repeater operation
Operates in dPMR Digital Conventional Voice and FM Analogue Modes, even on the same channel
Autosenses Received Mode (Digital or Analogue)
Also available as a firmware update to current NXDN NEXEDGE NXR-710E repeaters
Multi-Site IP Network Mode (via KTI-3 option)

Accessoires fournis

AmortisseurOui
Câble d' alimentation CCOui
FusibleOui, 15 A
PoignéeOui
Mode d'emploiOui, Anglais, Espagnol, Français, Italien, Allemand, Néerlandais, Turc ou Grec
Ensemble de visOui

Caractéristiques base et répétiteur

16 CTCSS/DCS Repeater Controller Built-InOui
19" Rack Mount DesignOui
Audio DistortionLess than 2,5%
CW IDOui
Flash ROM for Future UpgradesOui
Front Mounted SpeakerOui
Full-Duplex OperationOui
Hang TimerOui
LED Display & IndicatorsOui
Microphone Jack on Front PanelOui
Programmable Function Keys6
Repeater FeaturesOui
Time-Out TimerOui
Volume Control on Front PanelOui
Windows Programming and Tuning SoftwareOui

NEXEDGE dPMR Features

Intersite Call ModeUnicast

Normes applicables

dPMR: TS 102 658Oui, Tier 2 Mode 1 Peer-to-peer mode
Tier 2 Mode 2 Repeater mode
R&TTE: EN300 086, 300 113, 300 219, 301 489, 301 166Oui
EU Safety: EN60065, 60950-1, 60215Oui
Measurement - EIA StandardsOui
Measurement - EN StandardsOui

Spécifications techniques

Frequency Range136 - 174 MHz
Number of Channels30
Channel Frequency Spread38 MHz
Channel SpacingAnalogue : 25 kHz/20 kHz/12.5 kHz
Channel Spacing - Digital6,25 kHz
Antenna Impedance - 50 OhmOui
Antenna ConnectorRX: BNC
TX: N
Current drainStand-By: 0.5 A
Receive: 1.0 A
Transmit: 11.0 A
Duty Cycle100% at 25 W, 50% at maximum power
Frequency Stability± 1 ppm (-30 °C to + 60 °C)
Operating Temperature Range-30 °C to + 60 °C
Operating Voltage13.2 V DC (10.8 ~ 15.6 V DC)
PLL Channel Steps2.5 kHz / 3.125 kHz
Dimensions (WxHxD)483 x 88 x 340 mm
- Projections not included -
Weight (net)9.7 kg

Caractéristiques du récepteur

Adjacent Channel SelectivityAnalogue:
88 dB at 25 kHz
81 dB at 20 kHz
77 dB at 12.5 kHz
Audio Output4 W with less than 5% distortion
IntermodulationAnalogue: 72 dB
SensitivityDigital:
3% BER:
0.22 µV at 6.25 kHz.
1% BER:
-6 dB µV at 6.25 kHz.
Sensitivity - EIA 12 dB SINAD0.28 µV
Sensitivity - EN 20 dB SINAD-3dB µV
Spurious Reponse Rejection85 dB

Caractéristiques d'émetteur

RF Power Output5 W - 50 W
FM Noise (EIA)55 dB at 25 kHz
53 dB at 20 kHz
50 dB at 12.5 kHz
Modulation DistortionLess than 1%
Modulation LimitingAnalogue:
± 5.0 kHz at 25 kHz
± 4.0 kHz at 20 kHz
± 2.5 kHz at 12.5 kHz
Spurious Emission (EN)-36 dBm ≤ 1 GHz
-30 dBm > 1 GHz