France

TS-990S
  • TS-990S
  • TS-990S
  • TS-990S
  • TS-990S
  • TS-990S

Images additionnelles

TS-990S

Emetteur-récepteur HF/50 MHz


Points forts

HF/50MHz Flagship Base Station
200 watts output from 50V FET Push-pull PA stage
+40dBm Intercept Point RX
Main RX - Down Conversion on all bands
270Hz/500Hz/2.7kHz/6kHz/15kHz Roofing Filters
Sub RX - Down Conversion on 15/20/40/80/160M bands (as TS-590S RX)
500Hz/2.7kHz Roofing Filters
2 x TFT Colour Display screens
3 x DSP Processors
Built-in RTTY/FSK/PSK/QPSK Decoder/Encoder.
4 x SO-239 Antenna sockets plus RCA jacks for RX-only antenna input and external RX out. "Antenna Name" display function for the 4 SO-239 ports
Connectivity:-
10MHz Ref Clock I/O (BNC), External ATU port, Keyboard In, COM Port (Female 9-pin), Straight Key, Paddle/external Keyer, 2 x USB-A & 1 x USB-B ports, "ACC-2" Data/audio connector, "Remote" linear connector, analogue Meter Jack 3.5 mm, "DRV" low-level LF drive, Optical SP-DIF I/O, 2 x external speaker sockets, DVI-I Dual-link video port, LAN port

Accessoires fournis

AC Mains CableOui
FusibleOui, 1 x 4A
Mode d'emploiOui, Includes Circuit Diagram
Line FilterOui
PlugsOui, 1 x 7-pin DIN
1 x 13-pin DIN

Caractéristiques générales radio amateur

10 MHz Reference I/O PortOui, Selectable as Off, Input or Output. Impedance = 50Ω. Input level = 0dBm ± 10dB. Output Level = 0dBm
"Band Elimination Filter"Oui, Offers selectable-width notch function (300-1200Hz in 100Hz steps) with selectable attenuation (20 - 80 dB in 20 dB steps)
Manipulateur CW intégré à mémoires de messagesOui
Built-in Power SupplySwitched Mode PSU
Built-in Voice Guide and RecorderYes. Fully configurable guidance including operating status, SWR, TX power, menus.
Horloge interneOui, Two clock displays (local/time-zone) plus date. Can be updated from NTP servers via the LAN port
Port communication D-Sub 9 brochesOui
Connectivity10MHz Ref Clock Oscillator I/O (BNC)
External ATU port
Keypad (3.5 mm jack)
COM Port (Female 9-pin)
Straight/Paddle Key/External Keyer (6.3mm jack)
2 x USB-A & 1 x USB-B ports
"ACC-2" Data/audio connector
"Remote" linear connector
Analogue Meter (3.5mm jack)
"DRV" low-level LF drive (RCA)
Optical I/O
2 x external speaker sockets (3.5mm jacks)
DVI-I Dual-link video port
LAN port
Connecteur pour syntoniseur d'antenne (ATU) externeOui
Connector for Remote/Linear AmpOui
Codeur/décodeur CTCSSOui, Single-tone and cross-tone functions
Connexion de données pour TNC externeOui
Limiteur de bruit numériqueOui
Digital Optical PortsOui, Input = 44.1/48kHz 16/24-bit
Output = 48kHz 24-bit
Dimmer KeyYes - for displays and LEDs. 4 dimmer levels
Direct-access Band ButtonsOui, 10 buttons for Amateur bands 1.8 - 50 MHz plus 2 buttons for General Coverage. Up to 5 band-memories per button
Entrée de fréquence directeOui
"DRV" Low Level Drive Output TerminalOui, RCA jack - 1 mW output covers 1.8 to 50 MHz bands plus the 135.80-137.70 kHz LF band.
Dual ReceiveOui
DSP Devices3 x Analog Devices Inc SHARC 32-bit DSP chips
for Main IF, Sub IF and Bandscope functions
DX Cluster Tune FunctionOui, With compatible external Kenwood transceiver
Firmware Upgradeable via PCOui
Firmware Upgradeable via USB PortOui
Clavier en façadeOui
Mode FSK inverseOui
Headphone Socket with Dual RX OutputOui, Main and sub-Band RX audio can heard either mixed, or separated to the left/right channels
Stabilité en haute fréquenceOui
Touches en façade éclairéesOui
Key BeepYes - adjustable + OFF
Verrouillage des touchesOui
LAN PortOui
Loudspeaker SocketTwo external loudspeakers can be connected via 2 x 3.5mm mono sockets. Impedance range 4 - 8 ohms
Blocage de l'émission sur le canal mémoireOui
Canaux mémoires avec affichage alphanumérique120 Memory Channels
Memory Shift FunctionOui
Système de menu pour configuration individuelleOui, Switchable between CONFIG A and CONFIG B. Can also be saved to USB stick
Microphone Socket8-pin "Chrome" type
Monitor FunctionOui
Fonctions de balayage multiplesOui
Fonction SourdineOui
Logiciel de pilotage PC (en option)Oui
Message de mise sous tensionOui
Power-Off TimerConfigurable, including Timed Audio Recording
Pre-amplifierOui, Configurable per band
Pre-selectorOui, Configurable
Programmable Function KeysOui, 2 Front Panel PF keys plus up to 8 external/mic keys
Compatible PSK31Oui
Filtres à pente DSP coupe-haut/coupe-bas pour récepteurOui
Suppresseur de bruit du récepteurOui
Filtre éliminateur de bande pour récepteurOui
Commandable à distance par InternetARHP-990 Software allows remote operation
Roofing FilterEquipped with 270Hz, 500Hz, 2.7kHz, 6kHz and 15kHz as standard, plus space for optional 6th filter
Screen SaverOui, Configurable - two styles including 10-character text for callsign, name etc.
Sky Command 2Oui, With compatible external Kenwood transceiver
Processeur vocalOui
Sub ReceiverOui, Equivalent to TS-590S main receiver
TFT Colour DisplayOui, 2 TFT displays. 7" main display with operating information, Bandscope, Waterfall and touch-screen tuning function plus 3.5" sub display with audio scope, PSK tuning meter etc. Selectable background colours. 4 different styles of S-meter presentation. Sub-display includes X-Y function (FSK) or Vector function (PSK)
Temporisation d'arrêt (anti-bavard)Oui
Affichage transverterYes - direct entry of transverter frequency
Filtre audio TXOui
TX FunctionsSpeech Processor (Adjustable In/Out Levels). Changeable TX Filter Bandwidth. TX Audio Monitor. TX DSP Equalizer. VOX (Adjustable Gain and Delay Time settings). MIC Gain Control. CAR Level Setting. Adjustable Power Output.
Egaliseur TX/RXOui
Type port USBOui, 2 x USB-A for flash drives/keyboard plus 1 x USB-B for PC connectivity
Variable LCD Brightness with Selectable DimmerOui, Four configurable settings
Video Display PortOui, DVI port. Selectable 800x600 or 848x480 resolution
VOX (commande vocale) intégréOui, Separately configurable for voice (SSB, FM & AM) or Data Mode. Adjustable Gain, Delay and Anti-VOX

Spécifications radio amateur HF

Puissance de sortie HF200 W SSB/FM/CW/FSK, 50 W AM
Puissance de sortie 50 MHz RF200 W SSB/FM/CW/FSK, 50 W AM
Sortie minimale 5 watts pour les opérations QRPOui
A.C. Supply Voltage220 - 240 V (50/60 Hz)
Impédance d'antenne - 50 ohmsOui
Plage de syntonisation d'antenne (bandes 160 - 6 m) - 16,7 ohms à 150 ohmsOui
Impédance de la sortie audio - 8 ohmsOui
Puissance audioMore than 1,5 W (8 Ohm, 10% distortion)
Continuous RX: 30 kHz - 60 MHzOui, Within spec - 0.13 - 30 MHz & 50 - 54 MHz
Consommation de courant (environ)TX - 840 VA Power Consumption
RX - 200 VA Power Consumption
Stabilité en fréquence± 0.1 ppm 0 °C to +50 °C
Impédance du microphone - 600 ohmsOui
ModesA1A (CW), A3E (AM), J3E (SSB), F3E (FM), F1B (FSK) & G1B (PSK)
Notch Filter AttenuationAuto Mode - More than 60 dB
Manual Mode - More than 70 dB
Température de fonctionnement-0 °C to + 50 °C
Elimination des battements du récepteurSupérieur à 40 dB
Circuits du récepteurMain RX - Double superheterodyne
Sub RX1 Down Conversion - Double superheterodyne
Sub RX2 Up Conversion - Triple superheterodyne
Plage de fréquence du récepteurVFO Coverage = 30kHz - 60MHz
Main Band spec guaranteed = 0.13 - 30MHz/50-54MHz
Réjection FI du récepteurLess than 70dB
Réjection fréquence image du récepteurHF - Less than 70dB
50MHz - Less than 60dB
Fréquences intermédiaires du récepteurMain RX - 1st IF 8.248 MHz/2nd IF 24 kHz (FM - 455 kHz)
Sub RX1 Down Conversion - 1st IF 11.374 MHz/2nd IF 24 kHz
Sub RX2 Up Conversion - 1st IF 73.095 MHz/2nd IF 10.695 MHz/3rd IF 24 kHz (FM - 455 kHz)
Sélectivité du récepteurSSB (LO:200/HI:2800 Hz) - More than 2.4 kHz @ -6 dB/Less than 4.4 kHz @ -60dB
CW/FSK/PSK (Width: 500 Hz): More than 500 Hz @ -6 dB/Less than 1.2 kHz @ - 60 dB
AM (LO:100/HI:3000 Hz) - More than 6 kHz @ -6 dB/Less than 12 kHz @ -60dB
FM - More than 12 kHz @ -6 dB/Less than 25 kHz @ -50dB
Receiver Sensitivity - 0.13 - 0.522 MHzSSB/CW/FSK/PSK = less than 0.5µV
AM = less than 6.3µV
Receiver Sensitivity - 0.522 - 1.705 MHzSSB/CW/FSK/PSK = less than 4µV
AM = less than 32µV
Sensibilité du récepteur - 1,705 à 24,5 MHzSSB/CW/FSK/PSK = less than 0.2µV
AM = less than 2µV
Sensibilité du récepteur - 24,5 à 30 MHzSSB/CW/FSK/PSK = less than 0.13µV
AM = less than 1.3µV
Sensibilité du récepteur - 28 à 30 MHz (FM)Less than 0.22µV
Sensibilité du récepteur - 50 à 54 MHzSSB/CW/FSK/PSK = less than 0.13µV
AM = less than 1.3µV
FM = less than 0.22µV
Plage de fréquence RIT± 9,999 kHz
Suppression de porteuse de l'émetteurLess than -60 dB
Réponse en fréquence de l'émetteur300 Hz - 2700 Hz (within -6 dB)
Modulation de l'émetteurSSB/FM/AM = Modulation équilibrée/Modulation variable/Modulation à faible puissance
Rayonnement parasite de l'émetteurLess than -60dB
Rayonnement parasite de l'émetteur - 50 MHzLess than - 66 dB
Suppression des bandes latérales indésirables de l'émetteurLess than -60dB
Plage de fréquence XIT± 9,999 kHz
Dimensions (WxHxD)W x H x D = 460 x 182 x 449 mm including projections
Poids24,5 kg

CW Features


Options

External LoudspeakerOui, SP-990

Normes applicables

CE MarkedOui
R&TTE: 1999/5/ECOui
Factory Quality Certification and LocationISO 9001. Manufactured in Japan