France

NXR-810E
  • NXR-810E
  • NXR-810E

Images additionnelles

NXR-810E

Station de base numérique NEXEDGE FM UHF (certification ETSI)


Points forts

NXDN Digital Air Interface
AMBE+2 Vocoder for Natural Sounding Digital Voice
Operates in NXDN Digital Conventional and FM Analogue Modes, even on the same channel
Autosenses Received Mode (Digital or Analogue)
30 Channel Scanning Base Station (Conventional Mode)
Digital - Single-Site Trunking (future upgrade)
Multi-Site IP Network Mode (via KTI-3 option)

Accessoires fournis

AmortisseurOui
Câble d' alimentation CCOui
FusibleOui, 15 A
HandleOui
Mode d'emploiOui, Anglais, Espagnol, Français, Italien, Allemand, Néerlandais, Turc ou Grec
Ensemble de visOui

Caractéristiques base et répéteur

16 CTCSS/DCS Repeater Controller Built-InOui
Possibilité de montage en rack 19"Oui
Audio DistortionLess than 2,5%
Fonctionnement en mode Base ou RépéteurOui
Caractéristiques de la baseOui
CW IDOui
DTMF AUX Input MonitoringOui
DTMF AUX Output ControlOui
DTMF Front Panel PF-Key ControlOui
EIA Voter Tone GenerationOui
External FM Controller InterfaceOui
External MPT Controller InterfaceOui
ROM flash pour mises à niveau ultérieuresOui
Haut-parleur en façadeOui
Fonctionnement en duplex intégralOui
Hang TimerOui
Affichage à LED et voyantsOui
Microphone Jack on Front PanelOui
Program/Modem InterfaceOui
Programmable AUX I/OsOui
Touches de fonctions programmables6
Remote Termination InterfaceOui
Caractéristiques du répéteurOui
Temporisation d'arrêt (anti-bavard)Oui
Volume Control on Front PanelOui
Logiciel Windows de programmation et réglagesOui

NEXEDGE Features

FM Analogue Conventional IncludedOui
NXDN Conventional IncludedOui

NEXEDGE Base+Repeater Features

16 RAN Repeater Controller Built-In - Conventional ModeOui
Conventional IP InterfaceOui, From V2.00 Firmware
External Reference-Frequency ConnectionOui
GIDs Per Site1000 in Conventional Mode
Mixed FM/Digital Operation - Conventional ModeOui
NXDN Scrambler built-InOui
UIDs Per Site1000 in Conventional Mode

Applicable Standards

R&TTE: EN300 086, 300 113, 300 219, 301 489, 301 166Oui
EU Safety: EN60065, 60950-1, 60215Oui
Measurement - EIA StandardsOui
Measurement - EN StandardsOui

Spécifications techniques

Frequency Range400 - 470 MHz
Number of Channels30
Channel Frequency Spread70 MHz
Channel SpacingAnalogue : 25 kHz/20 kHz/12.5 kHz
Channel Spacing - Digital - Wide/Narrow12,5 kHz/6,25 kHz
Antenna Impedance - 50 OhmOui
Antenna ConnectorRX: BNC
TX: N
Current drainStand-By: 0.5 A
Receive: 1.0 A
Transmit: 11.0 A
Duty Cycle100% at 25 Watts, 50% at maximum power
Frequency Stability± 0,5 ppm (-30 °C to + 60 °C)
Operating Temperature Range-30 °C to + 60 °C
Operating Voltage13.6 V DC (10.8 ~ 15.6 V DC)
PLL Channel Steps3.125kHz/5.0 kHz
Dimensions (WxHxD)483 x 88 x 340 mm
- Projections not included -
Weight (net)9.7 kg

Caractéristiques du tuner

Adjacent Channel SelectivityAnalogue:
80 dB at 25 kHz
78 dB at 20 kHz
74 dB at 12.5 kHz
Audio Output4 Watts with less than 5% distortion
IntermodulationAnalogue: 72 dB
SensitivityDigital:
3% BER:
0.28 µV at 12.5 kHz
0.22 µV at 6.25 kHz.
1% BER:
-4 dB µV at 12.5 kHz
-6 dB µV at 6.25 kHz.
Sensitivity - EIA 12 dB SINAD0.28 µV
Sensitivity - EN 20 dB SINAD-3dB µV
Spurious Reponse Rejection85 dB

Caractéristiques du transmetteur

RF Power Output5 W - 40 W
FM Noise (EIA)55 dB at 25 kHz
53 dB at 20 kHz
50 dB at 12.5 kHz
Modulation DistortionLess than 1%
Modulation LimitingAnalogue:
± 5.0 kHz at 25 kHz
± 4.0 kHz at 20 kHz
± 2.5 kHz at 12.5 kHz
Spurious Emission (EN)-36 dBm ≤ 1 GHz
-30 dBm > 1 GHz